Μπορείτε να κάνετε Downgrade από την iPad Baseband σε μικρότερη ακόμα κι αν δεν την είχατε ποτέ στο iPhone σας.
Για να κάνετε το Downgrade, δεν έχετε παρά να πατήσετε στο redSn0w το "Jailbreak" και στα checkboxes, θα τικάρετε ΜΟΝΟ το "Downgrade from iPad baseband"
H διαδικασία του Downgrade διαρκεί αρκετή ώρα.
Μετά το Downgrade θα μπορείτε να χρησιμοποιήσετε το UltraSn0w για να ξεκλειδώσετε το iPhone.
The iPhone Dev Team is happy to announce a baseband downgrade option in redsn0w for those who are using the iPad’s 06.15 baseband on the iPhone3G or iPhone3GS.
The redsn0w update will be out very soon (less than an hour!)
Typically you’d have the 06.15 baseband if you unlock with ultrasn0w but updated your iPhone baseband past 05.13.04. With this new capability, you can now downgrade specifically from 06.15 to 05.13.04 (even if you never had 05.13.04 on that device before). This gives you the best of both worlds: ultrasn0w compatibility and a normal iPhone baseband with full GPS and the ability to use stock IPSWs again.
The redsn0w update will be out very soon (less than an hour!) But for the sake of preparation, here are the steps that will be used:After the ramdisk gets launched and you see the running Pwnapple, you’ll eventually get to the “Flashing Baseband” step. THIS STEP TAKES A VERY LONG TIME to complete and there won’t be any feedback while its running. Please just let it be for the next 3-8 minutes! When the ramdisk has done its job it will reboot the phone on its own.
- Use the “Extras->Select IPSW” button in redsn0w to tell it which firmware version you have installed (new-bootrom 3GS users can usually skip this step but it doesn’t hurt for them to do it too).
- Do a controlled shutdown of your iPhone (“slide to power off”). This step is very important to avoid mount problems when the ramdisk is running!
- Go back to the first screen and click “Jailbreak”. Enable the “Downgrade from iPad baseband” checkbox, disable Cydia if you already have it installed, and click Next proceed through the normal DFU ramdisk steps.
For those who are wondering if you can update your 3G or 3GS to 06.15 solely for the purposes of downgrading to 05.13.04, the answer is “yes” for 3G owners, and “maybe” for 3GS owners. The iPad baseband is not compatible with 3GS units manufactured week 34 of 2011 or later. If you have an iPhone3GS and if digits 3-5 of its Serial Number are 134 or later (xx134…), then you should NOT try to install the 06.15 baseband on your 3GS! It will brick your radio, preventing both the downgrade from working and normal iPhone software from using it as a phone! Be warned!
redSn0w 0.9.14b1(OS X)
redSn0w 0.9.14b1(Windows — run in Administrator Mode)
ΣΗΜΑΝΤΙΚΟ ΝΑ ΑΠΑΝΤΗΣΕΤΕ ΣΩΣΤΑ ΣΤΗΝ ΕΡΩΤΗΣΗ ΓΙΑ ΤΟ BOOTROM ΠΟΥ ΕΧΕΙ ΤΟ iPhone
Μετά το Downgrade, όσοι δεν έχετε σήμα κάντε τα παρακάτω:
1. Αφαίρεση του UltraSn0w(και του fixer αν το έχετε).
2. reInstall το mobile substrate
3. Reboot το iPhone
4. Εγκατάσταση του UltraSn0w 1.2.7
5. Reboot το iPhone
Tip από τον MuscleNerd:
many people who saw "No signal" issues after the downgrade from 06.15 fixed it by re-installing Mobile Substrate and/or ultrasn0w
Και η επίσημη θέση της Dev-Team μόλις τώρα.
Update #1: If you’re still using ultrasn0w after going down to 05.13.04, many people have reported that re-installing Mobile Substrate and/or ultrasn0w fixes crashes and “No Signal”.
Τελευταία επεξεργασία από: thanasis, 18/06/2012 - 12:18.
